clicking your way to be a
fringster -
interactive user guide
On your handset: Open the SMS message and click the download link
(see Figure)
NOTE: your fring-id is set as your international mobile
number:
Your friends can use this fring-id to locate you on the fring
network to talk and chat free of charge.
The following screen appears:
Click Yes using your left soft
key to begin the download process. Within a few seconds, the handset
accesses the website. fring is downloaded to your handset and you
are ready to begin the installation process.
NOTE: This process may take a few seconds.
Before you can use fring, it needs to be installed on your
handset. At the end of the download process, the following screen
appears:
When the screen in figure above appears, press Yes using
your left soft key.
NOTE: fring is currently in the process of obtaining the approval
seal needed so that the above Security warning will not appear. Be
assured that your mobile security is not being compromised in any
way.
The following screen appears:
Click Yes using your
left soft key to start install.
The following screen appears:
Selectt Install and
press OK using your left soft key.
Once the installation is complete, the following screen opens:
Select the memory you would like to use and press OK
using your left soft key.
Note: fring can be loaded into any
available memory space.
fring is now installed on your handset.
A short registration process is required before you can begin to
use fring.
The stages of this process are:
> Accepting the EULA (End User License Agreement)
> Nickname and Password Selection
> Service Definition
Before you can begin working with fring, read and accept the
EULA.
To read and accept the EULA:
1. Use the down arrow to scroll through the EULA.
2. Once you have read the EULA and agreed to the terms, press OK
using your left soft key.
3. The full EULA is available on our website at
www.fring.com/license.htm
The installation process begins and a progress bar is shown.
During the installation process, the following screen may appear
The specific access points may vary depending on your
international location and carrier.
Select your 3G/GPRS connection (and not your WAP
connection).
If you do not have any access point set up (what does it
mean – that they can't find this screen?), go to
Nokia on-line service to have your settings sent to your handset
via SMS
If you fail to configure access point correctly, you may do it
automatically by pressing OK.
Once the installation is complete, an Installation Complete
message appears briefly. You are now ready to select your fring
nickname and password. The registration screen allows you to select
your nickname and the password you will use to access your fring
account.
Your fring nickname will help your friends find you easily.
A password is required to secure your account and to protect your
fring contact list.
Note: The user-id is the international phone number
of your handset (+).
It cannot be changed. Your friends can search for you and
contact you using this number
To select your nickname:
1. Use the keys on your handset to choose the nickname you
want to use.
2. Use the down arrow on your handset to navigate to the
next field.
To select your password:
1. Use the keys on your handset to choose the password you
want to use (Passwords must be at least 4 characters).
2. Click Next using your right soft key to move to the next
screen.
Once you have chosen your fring nickname and password, provide
the details of your VoIP service (e.g., Skype or Google-Talk) so
that you can begin making and receiving VoIP calls.
Note: You
can add one or more VoIP services (e.g., Skype or Google-Talk) to
which you are registered. Make sure to have your username and
password for each.
If you do not already have a VoIP account,
register on the Web before you begin to add networks. You can add a
VoIP service at any time. See Adding or Editing a VoIP Service in
this guide.
To add a VoIP service:
Navigate between the options using the up and down arrows on
your handset.
Choose the network from the list and press the joystick in.
In the User name field, type the username of the service you have
selected (e.g., your Skype/Gtalk user name).
Navigate to the Password field using the down arrow on your
handset. In the Password field, type the password of the service you
have selected (e.g., your Skype/Gtalk password).
Click OK using your left soft key.
The system now sign you into the specific VoIP service.
Once the
sign in is complete, the VoIP selection screen appears.
If you are interested in adding an additional VoIP service,
repeat the steps above
If you have completed selecting VoIP services, press Next using
your right soft key.
You have successfully
completed the registration.
You are now ready to make your first
call.
Once you have completed the installation and registration
processes described above, you're ready to make your first call.
 The
contact list of your fring contacts, selected VoIP service(s)
contacts and the handset’s contact list appears.
Note: If you have added more than one VoIP service, the
contact list will display contacts from all services in a single
list
To know that everything is working
correctly, you may choose to call the "fring Test call". The fring
Echo is a test center that lets you record a message and plays it
back to you. If you hear both the message at the test center and the
message that you have recorded, you're ready to go!
To call the fring Echo:
1. From your contact list choose the fring Echo contact and
press the joystick in.
2. The call connects to the test center.
3. Listen to the message and follow the instructions.
4. Your testing is complete!
|
